| available finishes |
 |
| The following surface finishes are available: |
|
| • |
|
|
textured (wood grain finish) |
| • |
|
|
alpine (orange peel finish)
|
|
|
|
|
|
|
| cutting guidance |
|
| Sharp tungsten carbide tipped blades should be used. A slow speed is recommended and the saw should be wobble free to prevent chipping of the melamine surface. |
|
| edging strips |
|
| Matching edging strips are available in either melamine or PVC. Edging products available from: |
|
| • |
|
|
Edgepro |
|
+27 21 905 0430 |
| • |
|
|
National Edging |
|
+27 11 822 3278 |
| • |
|
|
Rehau |
|
+27 11 201 1300 |
| • |
|
|
Upper Edge Products |
|
+27 11 865 2847 |
| • |
|
|
Woodstock Edging |
|
+27 31 702 4590 |
|
|
|
| cleaning instructions |
|
| Use soapy water or a commercial cleaner. The use of abrasives should be avoided. |
|
| chemical resistance |
|
| Normal household chemicals either have no effect or a very slight effect on Novolam. Concentrated chemicals should not be left in contact for long periods. |
|
| heat resistance |
|
| The melamine coating on Novolam can support a superficial temperature of 120°c for at least ten minutes and 170°c for at least three minutes. |
